Apply Code Style
Print & Apply System
Apply Code Style comes with all the operating features necessary to meet the most common needs for printing and applying labels. It is equipped with modern microprocessor electronics with a 4-digit display and 4 system status LEDs. 3 operating cycles of the applicator group are memorized, selectable from the membrane keyboard.
The application group is equipped with a cylinder for approaching the product with a standard stroke of 300 m. Stroke of 500 mm is also available on request.
The label application plate is designed for labels up to 150 x 100 mm.
If necessary, it can be easily replaced for the application of labels up to 100 x 250 mm format.
If the system is installed on an automated line, it can be equipped with a label loss control with acoustic and light signaling of the system error status.
The end of cycle and system error OUT signals are available as standard.
Thermal transfer label
Toshiba TEC
Print & Apply System, equipped with 4 “and 6" thermal transfer printing engines, specific for “real time" blow or contact application. The operating parameters of the applicator group can be modified both from the keyboard and by resetting the application counter.
Optional
- Check of label application
- Barcode readability check
- Reel supporting external to printers
- Check for imminent end of ribbon and end of labels
- Alarm signals with luminous acoustic warning
| Available Models | Plate for application |
| APS 413 (4" print engine) (•) | 100 x 100 mm |
| APS 613 (6" print engine) (•) | 150 x 100 mm |
(•) Print engine excluded
| Data Sheet | SCARICA IL PDF |
|---|---|
Gruppo stampa |
Toshiba TEC B-EX4 e TEC B-EX6 (altri marchi e modelli a richiesta)
|
Metodo di Stampa |
trasferimento termico e/o termico diretto
|
Larghezza stampa |
4" - 6"
|
Interfaccia di comunicazione |
Ethernet-USB-Centronic–RS232C |
Gruppo applicatore |
|
Piastra applicazione |
100 x 100 mm (standard 4″)
100 x 150 mm (opzionale 4″)
150 x 100 (standard 6″)
150 x 210 mm (opzionale 6″)
|
Corsa Cilindro |
300 mm (standard)
170 mm (utile fuori ingombro)
500 mm (opzionale)
370 mm (utile fuori ingombro)
|
Prestazioni |
fino a 30 etichette/min. (in funzione della corsa cilindro e dimensione etichette)
|
Configurazione applicazione |
a contatto
a soffio d’aria
|
Alimentazione elettrica |
115-230 V, 50-60 Hz, 400 W
|
Alimentazione Pneumatica |
6 bar – consumo in stand by 0 nl |
Dimensioni |
700 x 600 x 400 mm |
Peso |
40 Kg. (bobina etichette esclusa)
|
Label Engineering reserves the right to make construction changes without prior notice that may lead to changes in the characteristics or performances indicated.